Filter Housings
We sell Pentek Water housings (formerly US FILTER), one of the world’s largest manufacturers of quality filter housings and they have housings available for a range of different applications.
Bench Top/Underbench Housings
Pentek Bench Top & Under Bench housings are made from FDA approved polypropylene material, these standard 1/4” housings are specifically designed for use in Bench Top or Under Bench filter applications, either as stand alone units or in combination such as in a 2, 3 or 4 Stage configuration.
|
 |
| DESCRIPTION |
FLOW RATE
(MAX) |
OPERATING
PRESSURE (MAX) |
TEMPERATURE (MAX) |
| 5” White with 1/4” ports |
19 lpm |
900Kpa (125 psi) |
50ºC |
| 10” White with 1/4” ports |
28 lpm |
900Kpa (125 psi) |
50ºC |
| |
|
Stainless Steel Mounting Brackets & Opening Handles available with filter housings
Complies to AS/NZ Standard 3497:2001 for Hydrostatic Test and Burst Pressure while the housings do comply to New Zealand Standards for Burst Pressure, the long term effect of water hammer over the extended life of the unit can not be accurately assessed. It is therefore highly recommended that a pressure reduction valve is installed prior to the housing in cases where water hammer is likely to occur (pressures above 700 kPa (100 psi).
.gif) AFP-Filter-Housing.pdf (187KB)
|
|
| |
Need a FREE On-Site Quote?
Call now on 0800 650 100 |
 |
 |
|
Need a FREE Service Check?
Call now on 0800 650 100 |
|
|
In-line Medium Flow Housings
Medium Flow housings are used for an enormous range of applications. Made from
tough polypropylene material these 1/2” and 3/4” housings have excellent chemical resistance
which make them ideal for domestic, rural and commercial use.
|
 |
| DESCRIPTION |
FLOW RATE
(MAX) |
OPERATING
PRESSURE (MAX) |
TEMPERATURE (MAX) |
| 10” Blue Slimline with 1/2” ports & Pressure Relief |
28 lpm |
900Kpa (125 psi) |
50ºC |
| 10” Blue Heavy Duty with 3/4” ports & Pressure Relief |
57 lpm |
900Kpa (125 psi) |
50ºC |
| 20” Blue with 3/4” ports & Pressure Relief |
57 lpm |
900Kpa (125 psi) |
50ºC |
| |
|
Stainless Steel Mounting Brackets & Opening Handles available with filter housings
Complies to AS/NZ Standard 3497:2001 for Hydrostatic Test and Burst Pressure while the housings do comply to New Zealand Standards for Burst Pressure, the long term effect of water hammer over the extended life of the unit can not be accurately assessed. It is therefore highly recommended that a pressure reduction valve is installed prior to the housing in cases where water hammer is likely to occur (pressures above 700 kPa (100 psi).
AFP-Filter-Housing.pdf (187KB)
|
|
| |
Need a FREE On-Site Quote?
Call now on 0800 650 100 |
|
|
|
Need a FREE Service Check?
Call now on 0800 650 100 |
|
|
In-line High Flow Big White Housings
Big White housings are manufactured with food grade reinforced polypropylene. With slightly thicker walls and more reinforcing strips, the Big White can handle more pressure than the Big Blue series. Pressure relief (air bleeders) buttons are standard.
|
 |
| DESCRIPTION |
FLOW RATE
(MAX) |
OPERATING
PRESSURE (MAX) |
TEMPERATURE (MAX) |
| 10” White with 1” ports & Pressure Relief |
75 lpm |
900Kpa (125 psi) |
50ºC |
| 20” White with 1” ports & Pressure Relief |
150 lpm |
900Kpa (125 psi) |
50ºC |
| |
|
Stainless Steel Mounting Brackets & Opening Handles available with filter housings
Complies to AS/NZ Standard 3497:2001 for Hydrostatic Test and Burst Pressure while the housings do comply to New Zealand Standards for Burst Pressure, the long term effect of water hammer over the extended life of the unit can not be accurately assessed. It is therefore highly recommended that a pressure reduction valve is installed prior to the housing in cases where water hammer is likely to occur (pressures above 700 kPa (100 psi).
AFP-Filter-Housing.pdf (187KB)
|
|
| |
Need a FREE On-Site Quote?
Call now on 0800 650 100 |
|
|
|
Need a FREE Service Check?
Call now on 0800 650 100 |
|
|
|
